Tannoy K3838 Predicted Low Frequency Response

The K3838 drive units were introduced arround 1982/3, and were intended as replacements for the HPD-385A, which was discontinued (The HPD 385A had apparently become expensive to make as it used a magnet material containing Cobalt - Alnico, Alcomax, or Ticonal magnets).

The response curve below was calulated using the published Theile and Small parameters for the K3838. The box volume was 7 cubic feet, and a box Q or 7 was assumed. Three curves are shown for port frequencies of 32, 37 and 42 Hz.

 

 

Return to: Tannoy Page;     Main Audio Page;     kiewa Valley home page


This page is created and maintained by Steve, at kiewa Valley Stereo.

The information contained in these web pages may NOT be used or reproduced
for commercial purposes without permission.